Leveraging Artificial Intelligence and Technology for Enhancing Halal Supply Chain Management
Abstract
Halal Supply Chain Management (HSCM) is transforming the way halal products are certified, tracked, and distributed. However, challenges such as regulatory compliance, technological readiness, cost, and stakeholder trust continue to impact AI adoption in the halal industry. This study employs the Decision-Making Trial and Evaluation Laboratory (DEMATEL) method to analyze the causal relationships among key factors influencing AI adoption in halal supply chains. Seven key criteria were identified: Technological Infrastructure, Regulatory Compliance, Cost of Implementation, Data Security & Privacy, Scalability & Adaptability, Stakeholder Readiness, and Consumer Trust & Perception. The findings reveal that Technological Infrastructure is the most influential factor driving AI adoption, impacting Regulatory Compliance, Scalability, and Consumer Trust. Conversely, Consumer Trust & Perception emerged as the most dependent factor, highlighting the importance of transparency in AI-based halal certification. Regulatory Compliance plays a dual role as both a cause and an effect, emphasizing the need for standardized AI-driven halal certification frameworks. The results suggest that investment in AI-driven traceability, blockchain-based halal authentication, and automated compliance verification can significantly improve halal supply chain efficiency and consumer confidence. This study provides valuable insights for policymakers, halal certification bodies, and industry stakeholders by identifying key enablers and barriers to AI adoption. Future research should explore hybrid Multi-Criteria Decision-Making (MCDM) approaches, economic feasibility analyses, and real-world case studies to further validate AI-driven solutions in halal supply chains.
References
H. Wahyuni, I. Vanany, and U. Ciptomulyono, “Food safety and halal food in the supply chain: Review and bibliometric analysis,” Journal of Industrial Engineering and Management, vol. 12, no. 2, pp. 373–391, 2019, doi: 10.3926/jiem.2803.
M. S. Ab Talib and M. H. Zulfakar, “Sustainable halal food supply chain management in a small rentier halal market,” Arab Gulf Journal of Scientific Research, Oct. 2023, doi: 10.1108/AGJSR-11-2022-0251.
W. M. Soeroto et al., “Sustainable Purchasing Decisions For Halal Cosmetics In Indonesia,” J Sustain Sci Manag, vol. 18, no. 11, pp. 68–86, 2023, doi: 10.46754/jssm.2023.11.005.
A. Azhar and Y. T. Tu, “The investigation of key factors for successful implementation of sustainable halal food supply chain management,” Food Res, vol. 5, no. 6, pp. 221–228, Dec. 2021, doi: 10.26656/fr.2017.5(6).235.
H. Mabkhot, “Factors Affecting the Sustainability of Halal Product Performance: Malaysian Evidence,” Sustainability (Switzerland), vol. 15, no. 3, Feb. 2023, doi: 10.3390/su15031850.
M. M. Rahman, M. S. A. Razimi, A. S. Ariffin, and N. Hashim, “Navigating moral landscape: Islamic ethical choices and sustainability in Halal meat production and consumption,” Dec. 01, 2024, Springer Nature. doi: 10.1007/s43621-024-00388-y.
C. Bux, E. Varese, V. Amicarelli, and M. Lombardi, “Halal Food Sustainability between Certification and Blockchain: A Review,” Feb. 01, 2022, MDPI. doi: 10.3390/su14042152.
N. Hashim, I. Sultan, S. Ali, B. Darussalam Nor, and S. Sulaiman, “A Case Study of Halal Green Concept Integration in Halal Product Development,” JHSR, vol. 3, no. 2, p. 2022, [Online]. Available: https://magscholar.com/jhsr/
M. Ghalih and C.-H. Chang, “Enhancing Sustainability in Halal Supply Chain,” 2024, pp. 335–364. doi: 10.4018/979-8-3693-5673-9.ch014.
M. Ghalih, C. H. Chang, and L. A. C. Johennesse, “Sustainable Development Goals (SDGs), Halal Supply Chain Management, and the Role of ESG in Promoting Ethical and Eco-Friendly Practices,” in Digital Technologies for a Resource Efficient Economy, IGI Global, 2024, pp. 228–255. doi: 10.4018/979-8-3693-2750-0.ch012.
A. Mahbubi and T. Uchiyama, “Assessing the Sustainability of the Indonesian Halal Beef Supply Chain,” International Journal on Food System Dynamics, vol. 11, no. 5, pp. 468–481, 2020, doi: 10.18461/ijfsd.v11i5.68.
V. N. riza Pratiwi, E. B. P. Putri, S. H. Rahajeng, P. Viantry, and A. B. Rakha Ramadhana, “Determinant Factors in Purchasing Decisions on Uncertified Halal Food Products: Study on Indonesian Students in Taiwan,” Indonesian Journal of Halal Research, vol. 6, no. 2, pp. 84–97, Aug. 2024, doi: 10.15575/ijhar.v6i2.34958.
M. S. Bhatia and R. K. Srivastava, “Analysis of external barriers to remanufacturing using grey-DEMATEL approach: An Indian perspective,” Resour Conserv Recycl, vol. 136, no. December 2017, pp. 79–87, 2018, doi: 10.1016/j.resconrec.2018.03.021.
D. Mathivathanan, D. Kannan, and A. N. Haq, “Sustainable supply chain management practices in Indian automotive industry: A multi-stakeholder view,” Resour Conserv Recycl, vol. 128, pp. 284–305, 2018, doi: 10.1016/j.resconrec.2017.01.003.
M. Abdel-Basset, G. Manogaran, and M. Mohamed, “Internet of Things (IoT) and its impact on supply chain: A framework for building smart, secure and efficient systems,” Future Generation Computer Systems, pp. 1–15, 2018, doi: 10.1016/j.future.2018.04.051.
G. Büyüközkan, S. Güleryüz, and B. Karpak, “A new combined IF-DEMATEL and IF-ANP approach for CRM partner evaluation,” Int J Prod Econ, 2017, doi: 10.1016/j.ijpe.2017.05.012.
G. George-Ufot, Y. Qu, and I. J. Orji, “Sustainable lifestyle factors influencing industries’ electric consumption patterns using Fuzzy logic and DEMATEL: The Nigerian perspective,” J Clean Prod, vol. 162, pp. 624–634, 2017, doi: 10.1016/j.jclepro.2017.05.188.
S. Luthra, K. Govindan, and S. K. Mangla, “Structural model for sustainable consumption and production adoption—A grey-DEMATEL based approach,” Resour Conserv Recycl, vol. 125, pp. 198–207, 2017, doi: 10.1016/j.resconrec.2017.02.018.
Copyright (c) 2025 Jurnal Teknologi Informasi dan Pendidikan

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.