Virtual Build Design of Simulator Soldering
Abstract
Electronic devices used by humans are often damaged. solder is the solution for repairing electronic devices. If someone wants to learn to use solder, they must study independently by watching video tutorials, when practiced without supervision is quite dangerous and this has a direct impact on workplace safety. The purpose of this research is to produce a Virtual Reality soldering application. Several stages were carried out in making this Virtual Reality soldering application, including analysis, design, development, and validation tests. The analysis is carried out by several processes including system requirements analysis and material analysis. In designing applications and creating virtual reality applications, Unity software is used as a game engine, and blender software is used to create 3-dimensional object assets. The results of the expert validation test of the virtual solder simulator media from the aspects of media design, software, and benefits obtained a score of 77.
References
R. K. Dewi, “Pemanafaatan Media 3 Dimensi Berbasis Virtual Reality Untuk Meningkatkan Minat Dan Hasil Belajar Ipa Siswa Kelas V Sd,” J. Pendidik., vol. 21, no. 1, pp. 28–37, 2020, doi: 10.33830/jp.v21i1.732.2020.
M. Al, F. Yosfiah, and F. Prasetya, “PERANCANGAN MEDIA PEMBELAJARAN INTERAKTIF VIRTUAL REALITY PADA MATA KULIAH TEKNOLOGI PEMESINAN DI JURUSAN TEKNIK MESIN FT - UNP DESIGN OF VIRTUAL REALITY INTERACTIVE LEARNING MEDIA IN MACHINERY TECHNOLOGY COURSE IN MECHANICAL ENGINEERING DEPARTMENT FT - U,” vol. 4, no. 1, pp. 132–136, 2022.
H. T. T. Saurik, D. D. Purwanto, and J. I. Hadikusuma, “Teknologi Virtual Reality untuk Media Informasi Kampus,” J. Teknol. Inf. dan Ilmu Komput., vol. 6, no. 1, p. 71, 2019, doi: 10.25126/jtiik.2019611238.
F. T. Moura, “Telepresence: The Extraordinary Power of Virtual Reality,” Retrieved August, vol. 26, p. 2020, 2017.
F. Oktafia and D. N. AN, “Persepsi Mahasiswa Sosiologi FIS UNP Tentang Mata Kuliah Micro Teaching dan Pelaksanaan Praktek Lapangan Kependidikan (PLK),” J. Sikola J. Kaji. Pendidik. dan Pembelajaran, vol. 2, no. 1, pp. 63–69, 2020.
K. T. Martono, D. Eridani, and D. I. S. Isabella, “User experience pada Implementasi Virtual Reality sebagai Media Pembelajaran Anak Pengidap Autisme,” J. Politek. Caltex Riau, vol. 6, no. 1, pp. 1–11, 2020.
H. T. Putro, “Kajian Virtual Reality,” Makal. Stud. Mandiri Univ. Teknol. Yogyakarta, Januari, 2015.
H. A. Musril, J. Jasmienti, and M. Hurrahman, “Implementasi Teknologi Virtual Reality Pada Media Pembelajaran Perakitan Komputer,” J. Nas. Pendidik. Tek. Inform., vol. 9, no. 1, p. 83, 2020, doi: 10.23887/janapati.v9i1.23215.
P. Anggoro, “Kajian Interaksi Pengguna untuk Navigasi Aplikasi Prambanan VR Berbasis Virtual Reality,” J. Teknol. Inf. dan Ilmu Komput., vol. 239, 2018.
W. Muldayani and I. Fibriani, “Kontrol Adaptasi PID pada Solder Oven untuk Komponen SMD.”
I. Hermawan, “E-Learning Berbasis Virtual classroom di Era Covid-19,” vol. 1, no. 1, pp. 1–10, 2020.
B. Sihite, F. Samopa, and N. A. Sani, “Pembuatan Aplikasi 3D Viewer Mobile dengan Menggunakan Teknologi Virtual Reality (Studi Kasus: Perobekan Bendera Belanda di Hotel Majapahit),” J. Tek. ITS, vol. 2, no. 2, pp. A397–A400, 2013.
I. Kurnia, “3D Pupper Making Virtual Museum Using Virtual Museum Virtual Reality Modelling Language 97 (VRML97) As Part Of The Pupper Museum Website: dalam internet,” Depok Gunadarma Univ. Libr., pp. 1–3, 2013.
S. Vidiardi, “Pengembangan museum virtual interaktif menggunakan teknologi desktop virtual reality pada museum Ranggawarsita.” UNIVERSITAS NEGERI SEMARANG, 2015.
Copyright (c) 2022 Jurnal Teknologi Informasi dan Pendidikan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
.png)
